To save the maximum amount of heat in the apartment and not to overpay for heating in the winter, try to warm the front door with their own hands. It is not as difficult as it may seem at first glance.
Perimeter
Warming of doors, both wooden and metal, usually begin around the perimeter. The task is not difficult. To solve it, you need to have a special seal that can be either self-adhesive or mortise.
How to insulate the iron front door with his help?
The self-adhesive sealer will require pre-surface treatment. Treat any suitable solvent (alcohol, acetone, paint solvent) to the doorframe, and firmly press the self-adhesive sealant around the perimeter to remove it from the substrate. Mortise seal force pressed against the groove, pre-cut in the door frame.
Board
How to insulate a metal front door around the perimeter so that it is secure? First of all, you need to accurately determine the thickness of the required insulation. You can do this with the help of clay. Wrap it in plastic wrap, position it between the door leaf and the box, and press it firmly. A roller is formed on the reverse side of the clay, its thickness will be the thickness of the insulation you need.
Insulate with heat insulating material.
How to insulate a metal front doorso that it is not only reliable, but also beautiful? If your door is a metal profile with a sheet of metal welded to it, it cannot protect against cold and noise. To warm the front door with their own hands It is possible, having filled with a suitable thermoisolating material the gaps between metal sheets.
As a heater, you can choose panels of polystyrene foam, foam, or other thermal and noise insulation materials.
Also need:
- one or more sheets of hardboard;
- liquid Nails;
- sealant;
- screws;
- tool for work (tape measure, door, jigsaw, screwdriver).
How to insulate the iron front door according to the rules?
- To start with a tape measure, take measurements of the door leaf. Acquire the obtained data accurately and accurately onto fiberboard, and cut the resulting pattern.
- Mark the holes for the locks and the peephole (if any) on the template, and also cut them.
- To cope with such a task, how to insulate the metal front door on your own, it is necessary to fill the voids in it with the chosen heater so that there are no voids and cracks left. Insulation is attached to the door with liquid nails or sealant.
- In the next stage to warm the front door with their own hands polyurethane foam will help you. With its help, all voids, even small gaps need to be filled, then allow the foam to dry, cut off all unnecessary, and cut holes in the sealant for the locks and eye. After this preparation can be considered finished.
- At the last stage, a sheet of fiberboard cut out according to the template is screwed along the entire perimeter of the web. Then the door can be upholstered with selected material - already mainly for decorative purposes.
If you still doubt, how to insulate iron front door without the help of experts, examine the design of your door. It is possible that some operations you do not need, and everything will be easier than you thought.
Leave Your Comment