Decorative partitions in the interior of the room - zoning ideas

When there is a need for redevelopment of a single room or apartment as a whole, decorative partitions can help. Since they not only perform an aesthetic function in the interior, they also serve as an excellent tool for zoning. The initial layout could be extremely unfortunate: small rooms caused claustrophobia, and large rooms were too uncomfortable, too spacious. In such cases, partitions allow rational use of the usable area and competently delimit the space. And the design implementation of these practical products guarantees the transformation of the interior beyond recognition. Sometimes this is the only right decision that the owner of the house can make in order to achieve comfort. Next, we consider the main characteristics and options for their use.

The use of decorative products in a modern interior

The choice of suitable decorative elements directly depends on the room that needs to be decorated. Based on its parameters, functional tasks and general stylistics, the selection of one or another type of decorative partitions should be carried out. The shape of the products must also take into account the characteristics of the specified space.

Among the advantages of using this decorative element note such as:

• Aesthetics and originality of performance;
• A wide range of materials used;
• Lack of restrictions for design ideas;
• Long service life;
• Ecological aspect.

The disadvantages include poor sound insulation or the relatively high cost of some models. Depending on the layout, there are two main types of decorative partitions in the interior:

1. Partitions for zoning rooms;
2. Interior partitions in the interior.

Partitions can be sliding (pivoting) and stationary. The first are often used as interior compartment doors on roller rails.

The use of partitions depending on the destination rooms

Living room

The versatility of this room puts forward its own requirements for the organization of space. Since there is not only a festive reception of guests, but also often a family dinner. All family members gather to discuss each their own interests. Therefore, it is necessary to fully satisfy their potential needs. It is even possible to use several decorative partitions.

Before installing the product, you need to make sure that the location for its placement is selected correctly.

It is recommended to read the articles on the design of modern interior, which can be offered various options for zoning rooms. Arguments that are presented there may affect the future layout. For example, you can divide the dining area and the seating area with an elegant screen or with a stylish glass partition. The use of specific materials should be guided by the overall color scheme of the living room, a type of furniture set.

Another option to place a lot of different accessories, colors or books can be a decorative partition - shelving. The comfort that it can provide allows you to fill the modern interior of the room with real comfort. A similar effect can be achieved when used as a partition - a decorative, built-in aquarium. Since his sides will be open to both zones, he will be able to perform a complex task: to decorate each zone, while keeping them separate from each other.

Bedroom

Often, in small apartments it is necessary to combine a bedroom with a study. The lack of space has an acute effect on the general feeling, which leads to the impossibility of both relaxation and fruitful work.

The use of decorative partitions helps solve this problem. A screen of various shapes ensures privacy for each member of the couple.

Translucent carved partition between the living room and bedroom

Kitchen

The main function of the partition in this room is to delimit the space for cooking and eating. Partitions in the interior of the kitchen stylishly ennoble the dining area, at the same time allowing you to improve the practicality of the area for cooking.

The wire screen on a wooden frame seems to be very convenient to use. It is used to house kitchen accessories, but the care with galvanized material is extremely simple. Such a decorative partition can have a variety of forms.

Children's room

It will require a division into three functional areas: for recreation, study, as well as the playground. Such zoning allows you to leave a mess in the place provided for this. The other space will be used for practical educational purposes. Often, for such an organization of the interior, a decorative box-like partition is used to additionally be able to fill it with something useful.

The main types of decorative partitions in the interior

Decorative partitions in the interior, designed to zoning a room, allow you to radically modify the perception of space with minimal means. At the same time, the achievement of the desired effect does not imply the destruction of the wall or ceiling surfaces of the room.

It will only require partial dismantling of the flooring. The parameters and form of the design product are selected to the taste of the owner, since there can be no significant limitations here. The partition for zoning a room can reach the height of the ceiling, or else not exceed the height of the smallest member of the family. The situation is similar with the width. As for the selection of material, we consider further the existing types.

Drywall

With the help of this material it is possible to embody practically any fantasy, since their installation or disassembly does not imply absolutely any difficulties. Drywall products are characterized by low weight, lightness, which determines the methods of their use. Finishing the surface of such a partition can be very different.

It is not recommended to give a serious load on the decorative plasterboard partition. Maximum up to 15 kg. Also has a high permeability of moisture.

The demand for this type of decorative element is due to the fact that it allows you to reliably hide engineering communications and is fire resistant.

Brick

This traditional material is also very popular. Typically, decorative brick is used where it is impossible to do without stationary partitions, since the dismantling of this type is characterized by its obvious complexity. The design properties of the noble material are great for a variety of interior styles (country, provence, etc.).

Tree

Wooden partitions are perfectly combined with any style of the room, with the exception of outright hi-tech. Often are the main element of the decor, attracting all the attention of guests. The carved, perfectly polished product from natural wood exquisitely decorates the interior.

The material for the frame of a structure, can serve as a board (timber) and MDF. Finishing involves the processing of natural materials with paint and varnish solutions. After this procedure, the wooden partition will be distinguished by its reliability and durability to mechanical stress. Among the disadvantages of the use of the material is called fire hazard, as well as the inadmissibility of excessive moisture.

Glass

Glass products are designed to preserve the usable space as much as possible, while leaving a feeling of openness. Frosted glass partitions quite clearly delineate the functional areas, not weighing and visually reducing the interior.

The disadvantages of this type include the obvious need for regular cleaning of the glass plane, as well as the impossibility to hide engineering communications in the decorative element. However, the aesthetic side of the material compensates for this disadvantage.

It is possible to apply patterns on the glass, as well as photographs.

Glass is used both for stationary partitions and as a sliding screen. The advantages of using this material include the absence of an obstacle to the passage of light, resistance to changes in humidity and temperature, durability.

the cloth

When a solid partition is not required, for the zoning of premises used partitions of fabric (curtains, curtains). Features of the material involve both pivoting and sliding partitions. This decorative element will require installation of a special cornice with guides under the ceiling.

The use of this design allows the canvas to easily slide and demarcate the space of living rooms. In the bedroom, a fabric screen provides an opportunity to retire, and in the living room to organize a home theater.

Rack

The convenience of the design of the rack is further to arrange on the open shelves of various accessories, whether books or lamps. Moreover, the shelves can be opened on several sides, for each functional area.

Metal forging

This decorative element requires a certain approach, since it will look subject to a specific style of room decoration.

You can name such interior design options as modern or art deco. Forged metal is used when it is necessary to place a fireplace in one of the sections of the room. Polished steel - when design refers to the high-tech style.

Making decorative elements with their own hands

Partitions can be made personally, but without suitable tools it will be extremely difficult. A simple for the manufacture of the element of decor is the material drywall. For example, consider the procedure for creating a stationary partition for dividing space into zones.

1. Markup. A profile of plasterboard up to 5 cm in width is laid on the floor, after which it is circled with chalk. The workpiece is mounted at a distance of one cm from the delineated line;
2. In the same way, the markup under the rack;
3. The profile height of about 2 m is fixed to the wall with self-tapping screws;
4. Temporary jumpers are marked for further installation of shelves;
5. The frame of the proposed construction is sewn up (width up to 25 cm is recommended). For this, on each of the sides, whole sheets of drywall are carefully trimmed. The leftovers will then go for trimming the ends;
6. Fixed perforated area with a stapler;
7. Finishing is made in two stages: reinforcing, then finishing.

This decor can be made by hand

Subsequently, the finished structure of the partition can be decorated at its discretion.

Unusual luminous screen of the branches and garlands

Conclusion

The use of designer products in the interior is often due to the need for functional zoning of space: whether it is a stationary partition for zoning a single room or the installation of sliding interior partitions. However, they can also be used as purely decorative elements, in order to aesthetically design the space.